|
Fixed Cable Half swaged kits are a good cost versus speed compromise for busy installers. One end of the FCH is terminated normally with a thimble, oval swage and stop swage, while the other end is left unfinished for termination at the time of installation. The swages and thimbles required to complete the assembly are bagged with the kit. This allows for the fastest possible speaker rigging installation while making the fewest possible field terminations. FCH kits are always a custom item. Each kit contains two wire rope assemblies swaged at one end, two thimbles, two oval swages, two stop swages, two matching shackles, and two #16 solid steel wires to safety the shackles. Custom cable assemblies are usually made to order within 24 hours, or on the same day when ordered early enough.
| Product Code |
Product Description |
ship
wt |
net
wt |
pkg
units |
| FCH-*-125 |
Fixed Cable Half swaged kit as shown above, custom length where * indicates inches, 1/8 inch wire ropes with 200 pound WLL each and 10:1 design factor. |
n/a |
0 lbs |
1 |
|
| FCH-*-187 |
Fixed Cable Half swaged kit as shown above, custom length where * indicates inches, 3/16 inch wire ropes with 420 pound WLL each and 10:1 design factor. |
n/a |
0 lbs |
1 |
|
| FCH-*-250 |
Fixed Cable Half swaged kit as shown above, custom length where * indicates inches, 1/4 inch wire ropes with 700 pound WLL each and 10:1 design factor. |
n/a |
0 lbs |
1 |
|
|
|
