|
Fixed Cable Kits are primarily used to to lower a Zbeam or other speaker load by a specified vertical distance. Each kit consists of two 3/16 inch 7x19 galvanized wire rope assemblies of matching lengths (+/- 1/16 inch), two 5/16 inch shackles, and two #16 solid steel wires bagged together in a single kit. An FC kit can also be added to a Tilt Cable Kit (TCK) to create a 4 point cable kit for speakers that have a four point rigging pattern. Each 3/16 inch Fixed Cable has a Working Load Limit (WLL) of 420 pounds with a 10:1 design factor. Also available in custom lengths, or other cable diameters. Custom cable assemblies are usually made to order within 24 hours, or on the same day when ordered early enough.
| Product Code |
Product Description |
ship
wt |
net
wt |
pkg
units |
| FC-*-& |
Fixed cable kit, custom length and custom diameter, where * indicates length and & indicates decimal diameter |
n/a |
0 lbs |
1 |
|
| FC-10-187 |
Fixed cable kit as shown above, 10 inches long, 3/16 inch wire ropes with 420 pound WLL each and 10:1 design factor. |
n/a |
0.4 lbs |
1 |
|
| FC-14-187 |
Fixed cable kit as shown above, 14 inches long, 3/16 inch wire ropes with 420 pound WLL each and 10:1 design factor. |
n/a |
0.5 lbs |
1 |
|
| FC-18-187 |
Fixed cable kit as shown above, 18 inches long, 3/16 inch wire ropes with 420 pound WLL each and 10:1 design factor. |
n/a |
0.6 lbs |
1 |
|
| FC-22-187 |
Fixed cable kit as shown above, 22 inches long, 3/16 inch wire ropes with 420 pound WLL each and 10:1 design factor. |
n/a |
0.7 lbs |
1 |
|
|
|
