Back Chain Kits		BC
< Previous Item		Next Item >
Click on photo to enlarge
Product Description
Speaker rigging Back Chain kits are used with speakers that have rigging points on some of the surfaces of the loudspeaker enclosure, but not on the surface needed. A typical instance requiring a Back Chain kit is when a needed speaker rigging point is missing from the back surface of a loudspeaker enclosure, but there is a point on the bottom. In such a case, the chain goes around the bottom corner connecting with a shackle to an eyebolt on the bottom of the speaker. The chain used is 9/32 inch Grade 80 heat treated alloy steel. Each Back Chain kit contains one length of chain as specified (in number of links, links are 0.8 inches long), two 1/4 inch shackles, and two lengths of #16 steel wire to safety the shackles. WLL is 500 pounds with a 10:1 design factor. Product Code Product Description ship wt net wt pkg units BC-03 3 link back chain kit n/a 0.2 lbs 1 BC-06 6 link back chain kit n/a 0.5 lbs 1 BC-09 9 link back chain kit n/a 0.7 lbs 1 BC-13 13 link back chain kit n/a 1 lbs 1
Additional Information
Related Items	CC: Cut Chain, SH: Shackles, TCK: Tilt Cable Kits, FC: Fixed Cable kits