Tilt Cable Kits
The adjustable Tilt Cable Kit is a companion to the Zbeam, XY Grid components or is used as a stand-alone speaker rigging kit. It provides rapid tilt control for single loudspeakers or a group of loudspeakers locked together. The ratcheting action of the Clutch Lock allows for tilt adjustments to be completed in just seconds. A standard adjustable Tilt Cable Kit contains all the hardware needed to connect to a Zbeam, XY Grid, Rigging Chain Sling kits, or beam clamps down to meet your eyebolts or other speaker rigging points. Structural support is provided by the two fixed length 3/16 inch galvanized wire rope assemblies with a Working Load Limit of 420 pounds (190 kilograms) each. Indicated Working Load Limits are for typical configurations. Special configuration Tilt Cable Kits can be used at loads up to 1100 pounds.